AAronia SDK

Support forum for development using SNDK and ASDK

AAronia SDK

Postby miaoudak » Thursday 7. February 2013, 10:41

Hello
I have downloaded aariona SDK and used the build.sh to create the GuiApp.
I try to Start either the GUI or th console application and I get the error:
DEVICE INITIALIZATION ERROR: file(30) could not be read (1)
I am using ubundu
Any help?
miaoudak
 
Posts: 3
Joined: Thursday 7. February 2013, 10:24

Re: AAronia SDK

Postby mm_dev » Friday 8. February 2013, 09:36

That means that for some reason the configuration of the connected Spectran device does not exist. What device did you try, and how old is it?
mm_dev
 
Posts: 285
Joined: Wednesday 4. May 2011, 07:43

Re: AAronia SDK

Postby miaoudak » Friday 8. February 2013, 10:12

Hello I am using a Spectran HF6060 with firmware 2.2 serial 02910. Another thing that might help is when I connect the instrument with mcs an selecting Spectran->Device Information in the window that opens all fields are empty.
thank you
miaoudak
 
Posts: 3
Joined: Thursday 7. February 2013, 10:24

Re: AAronia SDK

Postby mm_dev » Friday 8. February 2013, 11:37

Yeah, that dialog needs the mentioned configuration. On some old devices it doesn't exist, which I assume is the case here. You can still use the SDK though in general as most functions don't need that file. The examples should work if you replace the initializationFinished() signal with the initializationError() signal, and remove the existing initializationError() connection.
mm_dev
 
Posts: 285
Joined: Wednesday 4. May 2011, 07:43


Return to SNDK + ASDK

Who is online

Users browsing this forum: No registered users and 2 guests

cron