New Software and Firmware V1.6 now available

Aaronia RF-Generator and Field Strength Generator solutions up to 14GHz

New Software and Firmware V1.6 now available

Postby Moderator » Friday 15. January 2016, 14:29

Changes since 1.6:

- Firmware Update to fix firmware bug listed in 1.5.1, re-enable sweep point compression
- Fixed a bug where writing large sweep programs corrupted the calibration data
- Fixed a bug where the first frequency in a sweep was skipped
- Reworked program management so each program is stored in a separate plaintext file
- Various other bugfixes and improvements

REMOTE FEATURE enabled:

- Added the following commandline options to allow limited automation:
--load-program=<program> : Upload the given program to the device and execute it (by default also switches to "Program Mode" UI and enables automatic status updates)
<program> can be either a filename or just the program name in which case a lookup in the last used directory is performed
--exec=<code> : Compile, upload and execute the given program code (by default also switches to "Program Mode" UI and enables automatic status updates)
<code> is of the same format as a regularly stored program except semicolons are used instead of newlines, and surrounding quotes are stripped automatically
--no-show-status : Disables automatic status updates to avoid interference with the running program
--autoclose : Closes the application after uploading the program. You may still see the UI flashing up briefly.

Please download the latest version at http://spectran-developer.net/ftp/softw ... -Setup.exe
Moderator
 
Posts: 1048
Joined: Tuesday 20. April 2010, 13:24
Location: Aaronia AG

Re: New Software and Firmware V1.6 now available!

Postby Objekt » Saturday 16. January 2016, 11:34

FM geht immer noch nicht !
Beim Manuellen CW Mode dauert "RF an" nun ca. 8 Sekunden bis die HF erzeugt wird.

Wird die Software bei ihnen, vor Auslieferung nicht getestet ?

Objekt
Objekt
 
Posts: 4
Joined: Friday 25. December 2015, 16:29
Location: 97525 Schwebheim

Re: New Software and Firmware V1.6 now available!

Postby Moderator » Saturday 16. January 2016, 12:19

Können wir so nicht bestätigen, es klappt einwandfrei. Bitte senden Sie uns mal eine GENAUE Fehlerbeschreibung mit Setup, Typ etc. So können wir damit Nichts anfang...
Moderator
 
Posts: 1048
Joined: Tuesday 20. April 2010, 13:24
Location: Aaronia AG

Re: New Software and Firmware V1.6 now available!

Postby Objekt » Saturday 16. January 2016, 14:23

Erzeugung eines FM Signals

In der Anlage erhalten Sie dir Config Einstellungen und das Ergebnis.

Objekt
Attachments
Bild4.tiff
Bild3.tiff
Bild2.tiff
Bild1.tiff
Objekt
 
Posts: 4
Joined: Friday 25. December 2015, 16:29
Location: 97525 Schwebheim

Re: New Software and Firmware V1.6 now available!

Postby Moderator » Monday 18. January 2016, 10:45

Ok schauen wir uns an. Sollte es wirklich noch ein Problem geben, gibt es heute sicher ein Update :-)
Moderator
 
Posts: 1048
Joined: Tuesday 20. April 2010, 13:24
Location: Aaronia AG


Return to RF Signal-Generator

Who is online

Users browsing this forum: No registered users and 2 guests

cron