Aaronia RSA - NI LabView - Demo project

Aaronia Realtime Remote Server Software for all SPECTRAN Spectrum Analyzer

Aaronia RSA - NI LabView - Demo project

Postby stm » Thursday 23. April 2015, 08:39

How to use the Aaronia RSA (with EMF-Monitor software) / SNDK with the National Instrument LabView.

Here you can find a NI LabView demo project. This solution connects to a RSA/SNDK device and reads the incoming TCP/IP data packages. The project is a very simple demo without any optimizations and it doesn't support all functionalities of the RSA. It can be used as an example to prepare a connection to the remote device.

How to use the demo project.
- install the NI LabView software.
- start up your RSA device
- download the project source ( http://spectran-developer.net/ftp/software/source/AaroniaRSA-LabView-Demo.zip )
- open the RSA.lvproj file in the LabView software.
- press the "play" button in the LabView software

The project file has a default IP / Port configuration. Please make sure that your RSA device is running on these settings. If you are using an other IP configuration, you have the possibility to change the settings in the LabView project. You can find a description in the RSAv2-LabView.pdf documentation located in the project archive.

Please note that we can't give any support in using the LabView software!
Attachments
labview-demo-wiring.jpg
LabView block diagram of the demo project
labview-demo-main.jpg
LabView main application
stm
 
Posts: 4
Joined: Thursday 8. April 2010, 10:00

Return to Remote Server Software

Who is online

Users browsing this forum: No registered users and 1 guest