SPECTRAN NF 5035: LOGGER data has some 0Hz values

Aaronia Spectrum Analyzer (SPECTRAN NF, SPECTRAN HF, SPECTRAN XFR, SPECTRAN X, SEPCTRAN 19", Spectran V5)

SPECTRAN NF 5035: LOGGER data has some 0Hz values

Postby tonizg » Wednesday 9. November 2016, 20:39

Dear Sirs,

My question:
Q1: SPECTRAN NF 5035: LOGGER data generated: Why I get value for frequency 0 Hz while sweeping with numeric Hotkey "2" which represent POWER -mains frequency 50Hz or 60Hz; 45-65Hz?

Steps done in procedure for creating LOGGER data/TXT file:
1. select numeric Hotkey "2" which represent POWER -mains frequency 50Hz or 60Hz; 45-65Hz
2. select and start LOGGER function
3. after finished sweeping by LOGGER, by MCS transfer data to uploaded TXT file "50Hz_z_axis_a.txt"
4. in TXT file I see that there are lines which start with 0 Hz althogh there should be only data from SPAN 45-65 Hz because profile was from Hotkey "2"

50Hz_z_axis_a.txt
(62.43 KiB) Downloaded 296 times


In uploaded file "50Hz_z_axis_a.txt" there is 17 values for 0 Hz:

0 Hz 0,001604 G
0 Hz 0,001964 G
...
0 Hz 0,000977 G
0 Hz 0,001254 G

Best regards,
tonizg
tonizg
 
Posts: 9
Joined: Sunday 2. October 2016, 23:39

Re: SPECTRAN NF 5035: LOGGER data has some 0Hz values

Postby Moderator » Sunday 13. November 2016, 11:26

If you get 0Hz you simply get no Markert value (might be out of level range). Might be solved by using a bit slower sampletime or a lower logging rate.
Moderator
 
Posts: 1043
Joined: Tuesday 20. April 2010, 13:24
Location: Aaronia AG

Re: SPECTRAN NF 5035: LOGGER data has some 0Hz values

Postby tonizg » Friday 25. November 2016, 15:17

Thanks for answer.
With MCS I don't get such values so solution is as you suggested: "using a bit slower sampletime or a lower logging rate".

Best regards,
tonizg
tonizg
 
Posts: 9
Joined: Sunday 2. October 2016, 23:39


Return to Spectrum Analyzer

Who is online

Users browsing this forum: No registered users and 3 guests

cron