Hi,
I'm actually working with a brand new Spectran HF-6065 to do signal and noise analysis
in a factory where we got a lot of interferences between machines/devices which work on RF 433Mhz
The aim of my study is first to verify if all devices/machines work on right channel (pre-configured)
and then set different channel for suitable devices to not interfer with others.
I work with Spectran HF-6065 and the last MCS Spectrum Software 2.1.4 Qt5 on Windows 7.
I tried to modify and change analyse configuration many times but i still got a big issue :
when analysis operate, the signal is "refreshed" along spots, faster or slower following settings i use
the main issue is the following : when i try to scan a QRCode with a RF433Mhz scanner, the pulse
doesn't appear to the right frequency on the x-axis (Mhz). What i mean is that all pulses (=each QRCode i want to scan)
is displayed next to the previous one.
Therefore, my chart turns false because if i trust the x-axis when i'm scanning, the signal is displayed
following the time and not the frequency as it should be.
Do you guys have any idea of this behaviour ? did i do something wrong or is it a failure of my Spectran ?
Any idea or advice is welcomed !
Regards,
Gael