Aaronia RSA Documentation
Menu
Index

RSA SPECTRAN server TCP/IP Command API

 
In this Chapter we'll give you an overview about the command interface of the SPECTRAN server.
 
The command definition is divided into four main categories:
 
 
Each catagory has a set of commands for reading, writing information to the SPECTRAN device or make internal calculation with the measurement data.
 
The Server talks to the client with five protocol types:
 
 
You can find a detailed description of all command and protocol types in the following chapters.
 
Convetions:
Values written as <xxxx> are placeholder.
Parameter written as [xxxx] are optional parameter. Default read function will be used if nothing is set.
Parameter written as [xxxx | value] are also optional parameter, if nothing is set as value, a read function will be used.
 
 
 
Examples:
Read Startfrequency of device: SPECTRAN:CTRL:STARTFRQ ?
Read Startfrequency of device: SPECTRAN:CTRL:STARTFRQ
Write Startfrequency of device: SPECTRAN:CTRL:STARTFRQ 350
 
Important
It ist important that you have a "space" between the command and the value!
To write a frequency to the device, you have to use the analyzer base frequency unit. For the HF devices the unit is MHz, and for NF devices the unit is kHz.
 
 
 
 
The help manual was created with Dr.Explain